Installation Procedure

Attach the electrical connector to the CD changer.
Install the CD changer assembly into the center console.
NOTE: Refer to FASTENER NOTICE in GM VEHICLES CAUTIONS & NOTICES article.
Install the front CD changer assembly retaining screws (1).
Tighten

Tighten the front CD changer assembly retaining screws to 1.9 N.m (17 lb ft).
Install the rear CD changer assembly retaining screw.
Tighten

Tighten the rear CD changer assembly retaining screw to 2.5 N.m (22 lb ft).

Fig 1: Identifying Center Console Components
Courtesy of GENERAL MOTORS CORP.
Close the center armrest.