FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Standard › Repair and Diagnosis › External Pages › Different car › Section 1325 (Lighting Systems) › Repair Instructions › Backup Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the backup lamp electrical connector.
  2. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
    3. Fig 1: Rear Bumper Fascia And Back Up Lamp
    GM827294Courtesy of GENERAL MOTORS CORP.
  3. Remove the 1 bolt that retains the backup (2) lamp to the rear fascia (1).
  4. Remove the backup lamp socket if required, by turning counter clockwise.
  5. Remove the back up lamp (2) from the rear bumper fascia (1).
About FixVault