FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Standard › Repair and Diagnosis › External Pages › Different car › Section 1325 (Lighting Systems) › Repair Instructions › Headlamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.
    2. IMPORTANT: It is not necessary to remove the steering wheel to access the lower trim cover screws. The screws can be easily accessed by rotating the steering wheel.
  2. Remove the following components from the steering column:
    • The lower trim cover screw
    • The 2 lower trim cover screws that are located beneath the steering wheel (3).
  3. Remove the steering column lower trim cover (6).
  4. Remove the steering column upper trim cover (7).
    5. Fig 2: Turn Signal/Headlamp Switch Component View
    GM833134Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the turn signal/headlamp switch electrical connector.
  6. Remove the turn signal/headlamp switch (1) from the steering column by depressing the tab (2).
About FixVault