FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Standard › Repair and Diagnosis › External Pages › Different car › Section 1343 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Control Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Theft Deterrent Control Module Components
    GM886850Courtesy of GENERAL MOTORS CORP.
  1. Install the bracket (1) to the theft deterrent module (3), if removed.
  2. Install the theft deterrent module (3) with bracket (1) to the vehicle.
  3. Secure the theft deterrent module bracket (1) with the screw (2).
  4. Connect the theft deterrent module electrical connector (4).
  5. Install the instrument panel compartment door. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel Gauges and Console.
  6. Connect the negative battery cable.
About FixVault