FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Standard › Repair and Diagnosis › External Pages › Different car › Section 1396 (Door System, Mirror System & Window System) › Repair Instructions › DCM Programming/RPO Configuration

DCM Programming/RPO Configuration

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. The DDM/PDM must be programmed with the proper RPO configurations. The DDM/PDM stores the information regarding the vehicle options. If the DDM/PDM is not properly configured with the correct RPO codes the DDM/PDM will not control the features properly. Ensure that the following conditions exist in order to prepare for the DDM/PDM programming:
    • The battery is fully charged.
    • The ignition switch is in the RUN position.
    • The DLC is accessible.
  2. Follow the instructions on the Techline Terminal and scan tool to program the DDM/PDM.
  3. If the DDM/PDM fails to accept the program, perform the following steps:
    • Inspect all DDM/PDM connections.
    • Verify that the Techline Terminal and scan tool have the latest software version.
About FixVault