Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel stud to the wheel hub and bearing.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install 4 washers and the nut to the wheel stud.
Tighten: Tighten the wheel stud nut to 130 N.m (95 lb ft), drawing in the wheel stud.
- Remove the nut and the washers.
- Install the rotor. Refer to FRONT BRAKE ROTOR in Disc Brakes.
- Install the tire and the wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
- Lower the vehicle.