FixVault
Home › GMC › 2002 › Jimmy 4D Utility, AWD › Repair and Diagnosis › External Pages › Different car › Section 1488 (Power Steering System) › Repair Instructions › Power Steering Pump Bracket Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering pump bracket.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the power steering pump bracket mounting bolts.

    Tighten 

    Tighten the power steering pump mounting bolts to 50 N.m (37 lb ft).

  3. Install the drive belt tensioner. Refer to DRIVE BELT TENSIONER REPLACEMENT  in Engine Mechanical - 4.2L.
  4. Install the power steering pump. Refer to POWER STEERING PUMP REPLACEMENT (4.2L)   or POWER STEERING PUMP REPLACEMENT (5.3L)   . 
    Fig 1: Installing Power Steering Pump Bracket Mounting Bolts
    G01597065Courtesy of GENERAL MOTORS CORP.
About FixVault