FixVault
Home › GMC › 2002 › Sierra 1500 HD, RWD › Repair and Diagnosis › Engine Mechanical › Power Takeoff › Power Take-Off › Repair Instructions › Power Take-Off (PTO) Switch Replacement › Installation Procedure

Installation Procedure

  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
About FixVault