FixVault
Home › GMC › 2003 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Wiper Motor Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the wiper motor electrical connector.
  2. Remove the cover screws.
  3. Remove the cover.
  4. Remove the circuit board and terminal module by lifting up on the terminal.
    Fig 1: Removing Circuit Board & Terminal Module By Lifting Up On Terminal
    G01476427Courtesy of GENERAL MOTORS CORP.
About FixVault