FixVault
Home › GMC › 2003 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Flow Control Valve Replacement - Off Vehicle (CB Series) › Disassembly Procedure

Disassembly Procedure

  1. Remove the connector and fitting assembly (4).
  2. Remove the O-ring seal (3).
    Fig 1: Connector & O-Ring Seal
    G01467173Courtesy of GENERAL MOTORS CORP.
  3. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
Fig 2: Removing Control Valve Assembly & Flow Control Spring From Pump Housing Assembly
G01467174Courtesy of GENERAL MOTORS CORP.
About FixVault