FixVault
Home › GMC › 2003 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission Servicing › Removal & Installation › Vehicle Speed Sensor › Removal

Vehicle Speed Sensor: Removal

  1. Raise and support the vehicle.
  2. Remove the harness connector.
  3. Remove the bolt.
  4. Using a twisting and pulling motion, remove the vehicle speed sensor (1) from the case. See Fig 1.
  5. Remove and discard the "O" ring seal (3).
Fig 1: Removing & Installing VSS
G00089898Courtesy of GENERAL MOTORS CORP.
About FixVault