FixVault
Home › GMC › 2004 › Canyon 2D Pickup, 2.8 8, 4WD, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.8L (Introduction) › Repair Instructions › Accelerator Pedal Position (APP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor nuts.
  3. Remove the APP sensor from the vehicle.
    4. Fig 1: View Of APP Sensor
    GM1352013Courtesy of GENERAL MOTORS CORP.
About FixVault