FixVault
Home › GMC › 2004 › Envoy RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.2L (Introduction) › Repair Instructions › Accelerator Pedal Position (APP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing APP Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor retaining fasteners.
  3. Remove the APP sensor (2) from the vehicle.
About FixVault