FixVault
Home › GMC › 2004 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Repair Instructions › Remote CD Player Replacement › Installation Procedure

Installation Procedure

  1. Attach the electrical connector to the CD changer.
    Fig 1: Locating Remote CD Changer Assembly Components
    GM713017Courtesy of GENERAL MOTORS CORP.
  2. Install the CD changer assembly into the center console.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the front CD changer assembly retaining screws (1).

    Tighten:  Tighten the front CD changer assembly retaining screws to 1.9 N.m (17 lb ft).

  4. Install the rear CD changer assembly retaining screw.

    Tighten:  Tighten the rear CD changer assembly retaining screw to 2.5 N.m (22 lb ft).

  5. Close the center armrest.
About FixVault