FixVault
Home › GMC › 2004 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Positive Cable Replacement (4.3L) › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Disconnect the positive battery cable from the battery.
    3. Fig 1: Locating Bolt Retaining Positive Battery Cable To Underhood Fuse Block
    GM197383Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt retaining the positive battery cable to the underhood fuse block.
    4. Fig 2: Locating Nut Retaining Positive Battery Cable To Generator
    GM713799Courtesy of GENERAL MOTORS CORP.
  4. Remove the nut retaining the positive battery cable to the generator.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    6. Fig 3: Locating Nut Retaining Positive Battery Cable To Starter
    GM43021Courtesy of GENERAL MOTORS CORP.
  6. Remove the nut retaining the positive battery cable to the starter.
  7. Remove the positive battery cable bolt from the engine.
  8. Remove the battery positive cable.
About FixVault