FixVault
Home › GMC › 2004 › Jimmy 2D Utility, Part Time, Standard › Repair and Diagnosis › Electrical › Body Electrical › Wiring Systems - Introduction › Repair Instructions › Instrument Panel Electrical Center or Junction Block Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Junction Block Components
    GM824064Courtesy of GENERAL MOTORS CORP.
  1. Install each wire and terminal in the new junction block. Refer to Electrical Center Identification Views .
  2. Rewrap the wrapping (3) on the wiring harness.
  3. Install the junction block (2) to the instrument panel with the screw (1).
  4. Install the left insulator/closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
About FixVault