FixVault
Home › GMC › 2004 › Sierra 2500, 4D Pickup, 4WD, Part Time › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Repair Instructions › Traction Control Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the harness connector to the traction control switch.
  2. Install the traction control switch (2) into the instrument panel (IP) assembly (3), making sure that all of the switch retaining tabs (1) are engaged.
    3. Fig 1: Switch Retaining Tabs, Traction Control Switch & IP Assembly
    GM536364Courtesy of GENERAL MOTORS CORP.
  3. Install instrument panel (IP) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.
About FixVault