FixVault
Home › GMC › 2004 › Sierra 2500, 4D Pickup, 4WD, Part Time › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Repair Instructions › Traction Control Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove instrument panel (IP) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.
  2. Gently lift the switch retaining tabs (1) and remove the traction control switch (2) from the instrument panel (IP) assembly (3).
    3. Fig 1: Switch Retaining Tabs, Traction Control Switch & IP Assembly
    GM536364Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the traction control switch.
About FixVault