FixVault
Home › GMC › 2004 › Sierra 2500, 4D Pickup, 4WD, Part Time › Repair and Diagnosis › External Pages › Different variant/trim › Section 12 (Engine Controls - 4.3L (Introduction)) › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel sender. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel pump electrical connector.
    3. Fig 1: View Of Fuel Pump Electrical Connector
    GM871933Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel level sensor electrical connector retaining clip.
    4. Fig 2: View Of Fuel Level Sensor Electrical Connector Retaining Clip
    GM871934Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the fuel level sensor electrical connector.
    5. Fig 3: View Of Fuel Level Sensor Electrical Connector
    GM871936Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel level sensor retaining clip.
    6. Fig 4: Removing Fuel Level Sensor Retaining Clip
    GM871938Courtesy of GENERAL MOTORS CORP.
  6. Remove the fuel level sensor.
    7. Fig 5: Removing Fuel Level Sensor
    GM871942Courtesy of GENERAL MOTORS CORP.
About FixVault