FixVault
Home › GMC › 2005 › Jimmy Automatic, Automatic › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Diagnostic Information And Procedures › Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection(s) Description
Coolant Gage Sweep Test IPC Gages The IPC drives the coolant gage at or above 125°C (260°F) when you select Up. The IPC drives the coolant gage at or below 60°C (140°F) when you select Down.
Fuel Gage Sweep Test IPC Gages The IPC drives the fuel gage at or above full when you select Up. The IPC drives the fuel gage at or below empty when you select Down.
Speed Gage Sweep Test IPC Gages The IPC drives the speedometer at or above 160 km/h (100 mph) (base) or 190 km/h (120 mph) (uplevel) when you select Up. The IPC drives the speedometer at or below 0 km/h (0 mph) when you select Down.
Tach Gage Sweep Test IPC Gages The IPC drives the tachometer at or above 6000 RPM when you select Up. The IPC drives the tachometer at or below 0 RPM when you select Down.
Lamp Test - The IPC illuminates the following indicators when you select On:
  • ABS
  • Air Bag
  • Battery
  • BRAKE
  • Fasten Safety Belt
  • GATE AJAR
  • High Beam
  • LOW FUEL
  • OVERSPEED
  • SECURITY
  • SERVICE 4WD
  • SHIFT
  • TOW/HAUL

The indicators should illuminate until commanded Off.
1st PRNDL Display The IPC illuminates the 1st gear position (1) on the IPC when you select On. The 1st gear position should illuminate until commanded Off.
2nd PRNDL Display The IPC illuminates the 2nd gear position (2) on the IPC when you select On. The 2nd gear position should illuminate until commanded Off.
3rd PRNDL Display The IPC illuminates the 3rd gear position (3) on the IPC when you select On. The 3rd gear position should illuminate until commanded Off.
Drive PRNDL Display The IPC illuminates the drive position (D) on the IPC when you select On. The drive position should illuminate until commanded Off.
Neutral PRNDL Display The IPC illuminates the neutral position (N) on the IPC when you select On. The neutral position should illuminate until commanded Off.
Park PRNDL Display The IPC illuminates the park position (P) on the IPC when you select On. The park position should illuminate until commanded Off.
Reverse PRNDL Display The IPC illuminates the reverse position (R) on the IPC when you select On. The reverse position should illuminate until commanded Off.
About FixVault