FixVault
Home › GMC › 2005 › Jimmy Part Time, Automatic › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Inflatable Restraint System › Repair Instructions › Inflatable Restraint Front End Discriminating Sensor Replacement › Installation Procedure

Installation Procedure

  1. Remove any dirt, grease, or other impurities from the mounting surface.
    2. Fig 1: View Of Inflatable Restraint Front End Discriminating Sensor
    GM39372Courtesy of GENERAL MOTORS CORP.
  2. Install the inflatable restraint front end discriminating sensor horizontally to the lower radiator support surface.

    Ensure that the arrow is pointing toward the front of the vehicle.

    3. Fig 2: View Of Mounting Rivets
    GM9405Courtesy of GENERAL MOTORS CORP.
  3. Install the inflatable restraint front end discriminating sensor mounting rivets (GM P/N 15715058).
    4. Fig 3: View Of Inflatable Restraint Front End Discriminating Sensor Harness Connector
    GM39367Courtesy of GENERAL MOTORS CORP.
  4. Connect the inflatable restraint front end discriminating sensor harness connector to the sensor.
  5. Install the connector position assurance (CPA) to the inflatable restraint front end discriminating sensor harness connector.
  6. Install the off road skid plate, in equipped.
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1  and to SIR Disabling and Enabling Zone 3 .
About FixVault