FixVault
Home › GMC › 2005 › Jimmy Part Time, Automatic › Repair and Diagnosis › Steering › Steering Linkage (Non-Rack & Pinion) › Repair Instructions › Steering Linkage Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Skid Plate Assembly
    GM291214Courtesy of GENERAL MOTORS CORP.
  1. Install the steering linkage shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering linkage shield bolts and the washers.

    Tighten:  Tighten the steering linkage shield bolts to 32 N.m (24 lb ft).

  3. Lower the vehicle.
About FixVault