FixVault
Home › GMC › 2005 › Jimmy Part Time, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Floor Shift Control Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Console
    GM303478Courtesy of GENERAL MOTORS CORP.
  1. Remove the shift lever handle and boot. Refer to Floor Shift Control Boot Replacement .
  2. Remove the center console assembly. Refer to Console Replacement - Front Floor (Full Length (Auto Trans)) or Console Replacement - Front Floor (Non-Full Length) or Console Replacement - Front Floor (Full-Length (Manual Trans)) in Instrument Panel, Gages and Console.
  3. Disconnect the range selector cable from the shift control assembly. Refer to Automatic Transmission Range Selector Cable Replacement (Column Shift)  or Automatic Transmission Range Selector Cable Replacement (Console Shift) .
    4. Fig 2: View Of Shift Control Assembly
    GM449261Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts securing the shift controller to the floor panel.
  5. Remove the shift control assembly from the vehicle.
About FixVault