FixVault
Home › GMC › 2005 › Jimmy Part Time, Automatic › Repair and Diagnosis › Transmission › Transfer Case › Transfer Case - NVG 233-NP1 › Repair Instructions › Transfer Case Speed Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Front Speed Sensor Electrical Connector
    GM651506Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information
  2. Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
  3. Remove the front propeller shaft. Refer to Propeller Shaft Replacement - Front in Propeller Shaft.
  4. Remove the transfer case speed sensor electrical connector.
    5. Fig 2: Identifying Transfer Case Front Speed Sensor
    GM163707Courtesy of GENERAL MOTORS CORP.
  5. Remove the transfer case speed sensor.
About FixVault