FixVault
Home › GMC › 2005 › Jimmy Part Time, Standard › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Wiper Motor Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Front Wiper Motor Module Cover Screws
    GM348761Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper motor electrical connector.
  2. Remove the cover screws.
  3. Remove the cover.
  4. Remove the circuit board and terminal module by lifting up on the terminal.
About FixVault