FixVault
Home › GMC › 2005 › Jimmy Part Time, Standard › Repair and Diagnosis › Drivelines & Axles › Differentials & Drive Axles › Front Drive Axle › Repair Instructions › Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Differential Carrier Shield
    GM598196Courtesy of GENERAL MOTORS CORP.
  1. Install the front differential carrier shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front differential carrier shield bolts and the washers.

    Tighten:  Tighten the front differential carrier shield bolts to 25 N.m (18 lb ft).

  3. Lower the vehicle.
About FixVault