FixVault
Home › GMC › 2005 › Jimmy Part Time, Standard › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Bracket Replacement - Steering Column › Installation Procedure

Installation Procedure

    Fig 1: View Of Steering Column Bracket
    GM303371Courtesy of GENERAL MOTORS CORP.
  1. Install the brake pedal to the steering column support. Refer to Brake Pedal Assembly Replacement in Hydraulic Brakes.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering column support bracket fasteners.

    Tighten: 

    • Tighten the nuts to 25 N.m (18 lb ft).
    • Tighten the bolts to 25 N.m (18 lb ft).

  3. Install the brake switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes.
  4. Install the brake booster pushrod to the brake pedal. Refer to Vacuum Brake Booster Replacement in Hydraulic Brakes.
  5. Install the clutch master cylinder pushrod to the clutch pedal, if equipped. Refer to Clutch Pedal Replacement in Clutch.
  6. Install the instrument panel. Refer to Instrument Panel (I/P) Carrier Replacement .
About FixVault