FixVault
Home › GMC › 2005 › Jimmy Part Time, Standard › Repair and Diagnosis › Steering › Steering Linkage (Non-Rack & Pinion) › Repair Instructions › Pitman Arm Replacement (4WD) › Installation Procedure

Installation Procedure

    Fig 1: View Of Pitman Arm, Power Steering Gear, Washer & Nut
    GM398127Courtesy of GENERAL MOTORS CORP.
  1. Install the pitman arm to the pitman arm shaft.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the pitman arm washer and nut to the pitman arm shaft.

    Tighten:  Tighten the pitman arm nut to 250 N.m (185 lb ft).

  3. Remove power steering gear from the vise.
  4. Install the power steering gear. Refer to Power Steering Gear Replacement (RWD) or Power Steering Gear Replacement (4WD) in Power Steering System.
About FixVault