FixVault
Home › GMC › 2005 › Sierra 1500 HD, 4WD › Repair and Diagnosis › Engine Mechanical › Power Takeoff › Power Take-Off System › Repair Instructions › Power Take-Off (PTO) Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
    2. Fig 1: I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  2. Pull out the switch housing from the I/P.
  3. Disconnect the wire connector to the PTO switch.
  4. Remove the PTO switch from the switch housing.
About FixVault