FixVault
Home › GMC › 2005 › Sierra 1500 HD, RWD › Repair and Diagnosis › External Pages › Different car › Section 138 (Computer/Integrating Systems) › Repair Instructions › Data Link Connector Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster trim. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    2. Fig 1: View Of Data Link Connector
    GM1386648Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (1) securing the data link connector to the instrument panel (I/P).
About FixVault