FixVault
Home › GMC › 2005 › Sierra 1500 HD, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Engine Controls - 6.6L (Introduction)) › Repair Instructions › Glow Plug Controller Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Glow Plug Controller Electrical Connectors
    GM1335531Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) or Battery Negative Cable Disconnect/Connect Procedure (Auxiliary Battery) in Engine Electrical.
  2. Disconnect the glow plug controller electrical connector.
    3. Fig 2: Glow Plug Controller Battery Feed Electrical Connector
    GM1409333Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the glow plug controller battery feed electrical connector (1).
    4. Fig 3: View Of Glow Plug Controller Bolts
    GM1336490Courtesy of GENERAL MOTORS CORP.
  4. Remove the glow plug controller bolts.
  5. Remove the glow plug controller.
About FixVault