Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Generator Mounting Nuts And Bolts (3.5L)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the generator.
Tighten:
- Tighten the bolts to 50 N.m (37 lb ft).
- Tighten the nuts to 30 N.m (22 lb ft).
Install the generator electrical connections.
Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 3.5L.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .