FixVault

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Antenna Cable Components
    GM1566471Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Convertible) or Rear Seat Back Replacement (Sedan/Coupe) .
  2. Remove the front and rear carpet for access to the wiring harness. Refer to Front Floor Panel Carpet Replacement and Rear Floor Panel Carpet Replacement .
  3. Disconnect the antenna cable (1) from the antenna extension lead at the instrument panel (I/P).
  4. Cut off the visible end of the coaxial antenna cable (1) from the wiring harness in the front kick plate area.
  5. Fig 2: Identifying Antenna Lead & Base
    GM1566475Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the antenna lead (1) from antenna module/antenna base.
  7. Cut off the visible end of the coaxial antenna cable (1) from the wiring harness at the rear.