Adjustment Procedure
WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the headliner. Refer to Headliner Replacement .
- Position the sunroof module to the roof opening. Refer to Sunroof Module Assembly Replacement (C3Y) or Sunroof Module Assembly Replacement (CF5) .
- Install the torx bit screws.
- Adjust the 4 corner nuts to flushness dimensions,
- Adjust the window panel to the front roof edge (1). Adjust to - 1.0 mm (0.04 in).
- Adjust the window panel to the rear roof edge (2). Adjust to - 1.0 mm (0.04 in).
- Install the remaining bolts. Refer to Sunroof Module Assembly Replacement (C3Y) or Sunroof Module Assembly Replacement (CF5) .
- Install the headliner. Refer to Headliner Replacement .
IMPORTANT:
Ensure the sunroof module alignments are kept within these specifications to prevent wind and water leaks. Secure the 4 corner fasteners. DO NOT secure the remaining fastener at this time.