Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Shock Module & Upper Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Install the shock module to the vehicle.

NOTE: Refer to Fastener Notice .

Install the shock module upper mounting bolts.
Tighten: Tighten the bolts to 112 N.m (83 lb ft).

Fig 2: Removing Air Conditioning Line Retaining Nut From Shock Tower

Courtesy of GENERAL MOTORS CORP.

Position the air conditioning line bracket to the stud.
Install the air conditioning line retaining nut to stud.
Tighten: Tighten the nut to 9 N.m (80 lb in).
Raise the vehicle.

Fig 3: Removing & Installing Lower Shock Bolts

Courtesy of GENERAL MOTORS CORP.

Install the shock module lower mounting bolts (1).
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
Connect the upper ball joint to the steering knuckle.

Fig 4: Removing & Installing Upper Control Arm To Steering Knuckle Pinch Bolt

Courtesy of GENERAL MOTORS CORP.

Install the upper control arm to steering knuckle pinch bolt and nut.
Tighten: Tighten the bolt to 60 N.m (44 lb ft).
Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.