Installation Procedure

NOTE: Refer to Fastener Notice .

Fig 1: Locating Power Steering Fluid Reservoir And Bolts

Courtesy of GENERAL MOTORS CORP.

Install the remote power steering fluid reservoir (2).
Install the remote power steering fluid reservoir bolts (1).
Tighten: Tighten the bolts to 9 N.m (80 lb in)

Fig 2: View Of Power Steering Fluid Reservoir Outlet Hose And Clamp

Courtesy of GENERAL MOTORS CORP.

Fig 3: Identifying Power Steering Reservoir Inlet Hose And Clamp

Courtesy of GENERAL MOTORS CORP.

Connect the power steering reservoir inlet hose and clamp (1).
Clean all excess fluid from the vehicle and remove the drain pans.
Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .