Installation Procedure

Fig 1: View Of Negative Battery Cable Terminal And Nut

Courtesy of GENERAL MOTORS CORP.

Position and install the negative battery cable to the battery negative terminal (2).
NOTE: Refer to Fastener Notice .
Tighten the negative battery cable terminal (1) nut.
Tighten: Tighten the nut to 9 N.m (80 lb in).

Fig 2: Identifying Battery Cover Screw And Cover

Courtesy of GENERAL MOTORS CORP.

Install the battery cover and screw.
Tighten: Tighten the screw to 1.6 N.m (14 lb in).
Reset all of the customers radio station presets.
Install the middle row floor matt, if equipped.