Set Up a New Theft Deterrent Control Module
WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Use this procedure only if replacing the theft deterrent control module with a GM SPO Replacement Part.
IMPORTANT:
Before proceeding with Step 1, ensure the 10-minute or 30-minute relearn procedure has been completed.
- Connect a scan tool to the vehicle.
- Turn ON the ignition, with the engine OFF.
- With a scan tool, select Setup New VTD Module in the Vehicle Theft Deterrent, Special Functions data list.
- Follow the scan tool on-screen instructions.