Installation Procedure
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery (3).
- Install the battery hold down retainer (2) and bolt (1).
Tighten: Tighten the battery hold down retainer bolt to 18 N.m (13 lb ft).
- Connect the positive battery cable (2) to the battery (3).
Tighten: Tighten the positive battery cable to battery nut to 8 N.m (71 lb in).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
NOTE:
Refer to Fastener Notice
.