Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Install the microphone to the knee bolster trim panel.

Fig 1: View Of Microphone & Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the 2 retaining screws to the microphone.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .