FixVault
Home › GMC › 2007 › Acadia SLT, AWD › Repair and Diagnosis › External Pages › Different car › Section 428 (Mirror System) › Repair Instructions › Mirror Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to EXPRESS WINDOW DOWN CAUTION .
    Fig 1: View Of Mirror Harness & Electrical Connectors
    GM63798Courtesy of GENERAL MOTORS CORP.
  1. Position the mirror with the gasket and harness to the door.
    2. Fig 2: View Of Mirror Stud Fasteners
    GM1070816Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the fasteners (1) to the mirror.

    Tighten:  Tighten the mirror nuts to 10 N.m (89 lb in).

  3. Route the harness and secure the harness with the harness retainers.
  4. Connect the electrical connector(s).
    5. Fig 3: View of Window Clamp Access Plugs
    GM63834Courtesy of GENERAL MOTORS CORP.
  5. Install the mirror nut access plugs.
    6. Fig 4: View Of Door Panel Electrical Connector
    GM1071318Courtesy of GENERAL MOTORS CORP.
  6. Reconnect the electrical/audio connector.
    7. Fig 5: View Of Door Trim Panel
    GM63818Courtesy of GENERAL MOTORS CORP.
  7. Install the door trim panel. Refer to Door Trim Panel Replacement .
About FixVault