Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Pressure Modulator Valve (BPMV) Bracket & Nuts

Courtesy of GENERAL MOTORS CORP.

Install the bracket to the vehicle.
Install the 3 brake pressure modulator valve (BPMV) bracket nuts.
NOTE: Refer to Fastener Notice .

Tighten: Tighten the nuts to 10 N.m (89 lb in).

Fig 2: View Brake Pressure Modulator Valve (BPMV) Bracket Components

Courtesy of GENERAL MOTORS CORP.

Install the 4 BPMV bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.