Installation Procedure
WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel speed sensor and bolt (1) to the suspension knuckle and tighten to 9 N.m (80 lb in).
- Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
- Connect the wheel speed sensor electrical connector (2).
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .