FixVault
Home › GMC › 2007 › Sierra Classic 1500 HD, RWD › Repair and Diagnosis › Brakes › Anti-Lock Brake System & Traction Control System › Repair Instructions › Electronic Traction Control Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
    2. Fig 1: View Of Stabilitrak Switch & I/P Assembly
    GM786376Courtesy of GENERAL MOTORS CORP.
  2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).
    3. Fig 2: View Of Stabilitrak Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the stabilitrak switch.
About FixVault