FixVault
Home › GMC › 2007 › Sierra Classic 1500 HD, RWD › Repair and Diagnosis › Engine Mechanical › Power Takeoff › Power Take-Off › Repair Instructions › Power Take-Off Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
About FixVault