Turn Signal Switch Bracket Replacement

Fig 1: Identifying Turn Signal Switch Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
1	Turn Signal Switch Bracket Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Turn Signal Switch Bracket Procedure Disconnect any electrical connectors as needed. Release the plastic retaining tabs to release the turn signal switch bracket from the steering column.

Callout

Component Name

Preliminary Procedure:
Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .

Turn Signal Switch Bracket Bolt (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Turn Signal Switch Bracket

Procedure

Disconnect any electrical connectors as needed.
Release the plastic retaining tabs to release the turn signal switch bracket from the steering column.