FixVault
Home › GMC › 2008 › Yukon Base, 5.3 J › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Hybrid Engine Control System) › Diagnostic Information and Procedures › DTC P06AF › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Clear the DTC information.
  2. Turn the ignition OFF for 1 minute.
  3. Turn the ignition ON.
  4. Retest for DTC P06AF, ECM DTC P0606, or any communication DTCs.
About FixVault