FixVault
Home › GMC › 2009 › Canyon 2D Pickup, 5.3 L, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 5.3L - Introduction, Service & Repair › Repair Instructions › Air Cleaner Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: Integral Air Cleaner Housing & Bolts
    GM1899698Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner housing (1) to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the integral air cleaner housing bolts (2).

    Tighten:  Tighten the bolts to 15 N.m (11 lb ft).

    3. Fig 2: MAF/IAT Sensor
    GM1897141Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
About FixVault