FixVault
Home › GMC › 2009 › Envoy 4.2 S, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 4.2L - Introduction › Repair Instructions › Camshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Camshaft Position Sensor Electrical Connector
    GM487648Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the CMP sensor and tighten the bolt to 10 N.m (89 lb in).
  2. Install the CMP sensor electrical connector (1).
About FixVault