FixVault
Home › GMC › 2010 › Canyon 4D Pickup, 5.3 P, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 5.3L - Repair Instructions › Repair Instructions › Knock Sensor 1 Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of #1 Knock Sensor & Engine Oil Pan Rail Engine Wiring Harness Connectors
    GM1352025Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine wiring harness electrical connector from the KS (2).
  3. Remove the KS retaining bolt.
  4. Remove the KS (2) from the engine block.
About FixVault